Detach and reset
Solar Panel Removal and Reinstallation in Markham
Lifted off for the reroof. Set back with a fresh seal at each mount. A dry roof and a working system when it is done.
The Mounts Are Where a Reset Succeeds or Fails
Lifting solar off a house is not the hard part. Setting it back without inviting water in is. Each foot that anchors your solar passes straight through the roof, and on a brand-new roof every one of those holes deserves a fresh seal. That idea shapes how Solar Panel Removal Markham handles a detach and reset. It begins gently. The system is powered down and disconnected, and we take photos plus an output reading so there is a picture of how things were. Then the modules, their rails and the conduit come down. Each module gets a tag showing its place, and a written list keeps track of every piece. While the roofing crew does its work, your solar waits in safekeeping. Once the fresh shingles are on, new feet go in at each anchor point and each one is flashed again. Old flashing never goes back on. Rails are reattached, modules return to the places they came from, and the wiring is reconnected. A final check confirms your system is making power, and you get paperwork covering each stage. For a Markham homeowner, the outcome is quiet and simple. New roof. Working solar. No drip.
Everything a Reset Covers
From the first photo to the last check, in order.
Before pictures and an output reading
How the layout and wiring looked, and what the system produced, saved before anything moves.
Gentle power-down
Disconnected with care before any module is touched.
Modules, rails and conduit lifted off
Everything comes down so the roofing crew has open shingles to work on.
Tags and a written list
Each module marked with its place. Each piece counted.
Safekeeping during the reroof
Held away from foot traffic, ladders and rain until the roof is ready.
New feet at each anchor
Fresh mounting hardware wherever the solar fastens to the new roof.
A fresh seal at each hole
Every mount flashed again following the shingle maker's details. Nothing old reused.
Reconnected and checked
Modules back where they lived, wiring rejoined, output confirmed.
What Happens, Stage by Stage
A quiet first call
You share the module count, when the roof work is planned and whether the system is yours or a leasing company’s. For a lease, the agreement or the leasing company decides who may work on it. You will hear a firm figure from us, usually within 48 hours.
Lifting it off
A little before the old shingles come off, we power down, take the pictures, then lift off, tag and put away every module and piece.
Setting it back
With the fresh roof on, new feet and fresh flashing go in at each anchor, modules return to their places, wiring is rejoined and we confirm it is making power.
Why Markham Homeowners Pick Our Reset
Seals done with patience
Each anchor on the fresh roof is sealed again, so water stays outside where it belongs.
A picture of before
Photos and an output reading show how your solar was set up and what it made.
No guessing about dates
You always know what stage the job is at and what comes next.
- Every anchor resealed
- Modules tagged
- Before photos
- Output checked
New Shingles Coming Under Your Solar?
Hand us the solar part so your fresh roof stays dry at every anchor. Share your module count and roof timing to begin.